Description
Atmel’s AT16373 devices provide maximum speed in temporary data storage. They can be operated as either two separate 8 bit latches or as a single 16-bit latch by use of the output enable and the latch enable. The AT16373 has very low ground bounce and excellent input noise rejection, giving the user stable signals in a high speed environment. These devices can drive very large loads while operating in a high speed transparent mode.

Features
• Fastest Propagation Speeds in the Industry TPD (F grade) = 2.5 ns, TPD (G grade) = 2.0 ns
• Maximum derating for capacitive loads 1.5ns/100 pF (F grade) and 1.1ns/100 pF (G grade)
• Very low ground bounce < 0.6V @ VCC=5.00V, Ta=25°C
• Excellent noise rejection
• Typical output skew ≤0.25ns
• Bus Hold circuitry to retain last active state during Tri-state
• Available in SSOP and TSSOP packages