GD25LE80CLIGR / GigaDevice Semiconductor (Beijing) Inc.

GD25LE80CLIGR Datasheet with Chat AI

Hello, Please ask a question about GD25LE80CLIGR Datasheet

# Example questions: ➢ Explain the function of the cmp bit and how it interacts with the bp4-bp0 bits to define memory protection.
➢ What happens when the srp1 and srp0 bits are set to (1,0)?
➢ What is the purpose of the qe bit and what should be considered when using it?

Part No.	GD25LE80CLIGR
Manufacturer	GIGADEVICE
Size	1Mb
Pages	68 pages
Description	1.8V Uniform Sector Dual and Quad Serial Flash

Datasheet Summary with AI

1. Chip Overview (GD25LE80C)

️· Type: 1.8V Uniform Sector Flash Memory
️· Key Features: Supports Dual/Quad IO. Includes various protections (block, hardware, OTP, power-down) and a Status Register with configurable behavior.

2. Status Register Bits

Bit(s) Name Function Default Value Notes

S15 SUS1 Erase Suspend indicator (set by Program/Erase Suspend command) 0 Cleared by Program/Erase Resume or power cycle.

S14 CMP Configuration Mode bit - affects Block Protect behavior (see Tables 1 & 1A) 0 Controls how Block Protection is applied.

S13-S11 LB3-LB1 OTP Security Register Control. Set to 1 to lock Security Registers. 0 One-Time Programmable.

S10 SUS2 Program Suspend indicator (set by Program/Erase Suspend command) 0 Cleared by Program/Erase Resume or power cycle.

S9 QE Quad Enable. Controls Quad IO pins (IO2, IO3) and WP#/HOLD# functionality. 0 Set to 0 to enable WP#/HOLD#. Recommended to avoid shorting issues with external circuitry.

S8 SRP1 Status Register Protection bit - Controls how Status Register can be written. 0 Controls Power-Down, Hardware, One-Time Programming lock-down.

S7 SRP0 Status Register Protection bit - controls how Status Register can be written. 0 See SRP1 for details.

S6 BP4 Block Protect bit - Non-volatile. Defines protected memory area. 0 Part of Block Protect scheme.

S5-S3 BP3-BP1 Block Protect bits - Non-volatile. Defines protected memory area. 0 Part of Block Protect scheme.

S2 BP0 Block Protect bit - Non-volatile. Defines protected memory area. 0 Part of Block Protect scheme.

S1 WEL Write Enable Latch - Indicates if the device can accept write commands. 1 Must be 1 to write to status register, program or erase.

S0 WIP Write in Progress - Indicates if the device is busy with a write operation. 0 Must be 0 to initiate a write operation.

3. Protection Features (Important!)

️· Block Protection (BP0-BP4): Define a protected area within the flash. Requires Write Status Register command.
️· Hardware Protection (SRP1, SRP0): Controlled by an external pin (#WP).
️· Power-Down Lock-Down (SRP1, SRP0): Prevents modification of the Status Register until a power cycle.
️· One-Time Programmable Protection (SRP1, SRP0): Prevents any future modification of the Status Register.
️· Security Registers (LB3-LB1): Locked using the LB bits. Once locked, they become read-only.

4. Key Commands/Operations and their Impact

️· Write Status Register (WRSR): Used to modify Status Register bits (except WIP and WEL).
️· Program/Erase Suspend (75H): Sets the SUS1 bit.
️· Program/Erase Resume (7AH): Clears SUS1 and SUS2 bits.

Bit(s)	Name	Function	Default Value	Notes
S15	SUS1	Erase Suspend indicator (set by Program/Erase Suspend command)	0	Cleared by Program/Erase Resume or power cycle.
S14	CMP	Configuration Mode bit - affects Block Protect behavior (see Tables 1 & 1A)	0	Controls how Block Protection is applied.
S13-S11	LB3-LB1	OTP Security Register Control. Set to 1 to lock Security Registers.	0	One-Time Programmable.
S10	SUS2	Program Suspend indicator (set by Program/Erase Suspend command)	0	Cleared by Program/Erase Resume or power cycle.
S9	QE	Quad Enable. Controls Quad IO pins (IO2, IO3) and WP#/HOLD# functionality.	0	Set to 0 to enable WP#/HOLD#. Recommended to avoid shorting issues with external circuitry.
S8	SRP1	Status Register Protection bit - Controls how Status Register can be written.	0	Controls Power-Down, Hardware, One-Time Programming lock-down.
S7	SRP0	Status Register Protection bit - controls how Status Register can be written.	0	See SRP1 for details.
S6	BP4	Block Protect bit - Non-volatile. Defines protected memory area.	0	Part of Block Protect scheme.
S5-S3	BP3-BP1	Block Protect bits - Non-volatile. Defines protected memory area.	0	Part of Block Protect scheme.
S2	BP0	Block Protect bit - Non-volatile. Defines protected memory area.	0	Part of Block Protect scheme.
S1	WEL	Write Enable Latch - Indicates if the device can accept write commands.	1	Must be 1 to write to status register, program or erase.
S0	WIP	Write in Progress - Indicates if the device is busy with a write operation.	0	Must be 0 to initiate a write operation.