# Thermoelectric Module Datasheet RMT Ltd

## Performance Parameters

Type	ΔTmax K	Qmax W	Imax A	Umax V	AC R Ohm	H mm	h mm
1MC06-070-05	69	15.8	3.4	8.6	2.05	1.6	0.5
1MC06-070-08	70	10.4	2.2	2.2	3.25	1.9	0.8
1MC06-070-10	71	8.4	1.8	1.8	4.05	2.1	1.0
1MC06-070-12	71	7.1	1.5	1.5	4.85	2.3	1.2
1MC06-070-15	72	5.7	1.2	1.2	6.00	2.6	1.5

️· Performance data given at 300K, vacuum.

## Ceramics

️· Options:
- Pure Al2O3 (100%)
- Alumina (Al2O3 - 96%)
- Aluminum Nitride (AlN)
- Standard: 100% Al2O3
️· Surface Options:
- Blank ceramics
- Metallized:
■ Ni / Sn(Bi)
■ Gold plating
- Metallized & pre-tinned:
■ Solder 94 (PbSnBi, Tmelt=94°C)
■ Solder 117 (In-Sn, Tmelt=117°C)
■ Solder 138 (Sn-Bi, Tmelt=138°C)
■ Solder 183 (Pb-Sn, Tmelt=183°C)

## Additional Features

️· Thermistor: Optional, can be mounted to cold side ceramics edge; calibration available.
️· Terminal Wires:
- Pre-tinned Copper
- Insulated Wires
- Insulated Color Coded
️· Solder: SnSb (Tmelt=230°C)

## Installation Methods

️· Mechanical Mounting
️· Soldering
️· Glueing

## Application Notes

️· Do not heat TE module above 200°C (assembled at 230°C).
️· Always use a heatsink on the hot (bottom) side.
️· Connect to DC power supply according to polarity.
️· Do not exceed maximum current (Imax).