SHIELDED SMD INDUCTOR DR357-2 SERIES

Features

️· Low Profile Surface Mount Design
️· Flat Top for Pick and Place
️· Inductance Range: 4.7µH to 150.0µH
️· Operating Temperature: -40°C to +105°C
️· Tinned Leads (Leaded Solder Available)

Electrical Specifications (at 25°C)

Part Number	Inductance (µH)	DCR (Ω)	Irms (A)	Isat (A)
DR357-2-472	4.7 30%	0.030	3.30	4.00
DR357-2-682	6.8 30%	0.035	3.15	3.20
DR357-2-822	8.2 30%	0.050	2.50	3.00
DR357-2-103	10.0 30%	0.058	2.40	2.70
DR357-2-123	12.0 30%	0.072	2.10	2.40
DR357-2-153	15.0 30%	0.087	2.05	2.20
DR357-2-183	18.0 30%	0.116	1.50	2.00
DR357-2-223	22.0 30%	0.145	1.20	1.80
DR357-2-273	27.0 30%	0.176	1.15	1.65
DR357-2-333	33.0 30%	0.213	1.10	1.48
DR357-2-393	39.0 30%	0.269	1.00	1.35
DR357-2-473	47.0 30%	0.299	0.90	1.20
DR357-2-563	56.0 30%	0.336	0.78	1.15
DR357-2-683	68.0 30%	0.451	0.68	1.05
DR357-2-823	82.0 30%	0.514	0.63	0.95
DR357-2-104	100.0 30%	0.700	0.56	0.85
DR357-2-124	120.0 30%	0.765	0.53	0.76
DR357-2-154	150.0 30%	0.876	0.51	0.70

Notes

️· Dimensions in millimeters (mm)
️· General Tolerance: 0.2mm
️· Inductance Test: 100kHz, 0.1Vrms
️· Irms: Approximate 40°C temperature rise
️· Isat: Approximate 35% drop in initial value
️· Tape & Reel Quantity: 1000 pcs/reel
️· Non-RoHS Part Designation: Replace "DR" with "42-"
️· Terminal Finish: RoHS compliant, Solder per J-STD-020D