| メーカー | 部品番号 | データシート | 部品情報 |

PHOENIX CONTACT
|
CRIMPFOX-C50-RCT-35-1 |
47Kb/2P |
Die (pair), for CRIMPFOX-C50, for copper tube lug 35 mm짼, WM crimp |
| CRIMPFOX-C120-RCT-95-1 |
46Kb/2P |
Die (pair), for CRIMPFOX-C120, for copper tube lug 95 mm짼, WM crimp |
| 2200160 |
45Kb/2P |
Mounting foot for 122 mm UM-PRO profiles for mounting on DIN rails |
| 1680380 |
75Kb/3P |
Rubber seal for Pg screw connection 13.5, for conductor diameter 6.5mm, 9.5 mm |
| 1658257 |
42Kb/2P |
Fine-polish film, 1 關m, for assembly tool set VS-GOF-FA-KONFTOOL ..., for single-mode and optional for multimode, |
| CF-500COV |
47Kb/2P |
Protective cover for crimping machine CF, without recess (for all dies without classification) |
| CRIMPFOX-C50R50-70 |
47Kb/2P |
pre-round die (pair), for CRIMPFOX-C50, for sector cable 50 + 70 mm짼 |
| CA-Z0001 |
44Kb/2P |
Unlocking tool for contact carriers for snapping in the M23 signal device connectors |
| 2725147 |
50Kb/2P |
Fiber cutter for assembling polymer fiber cables for connecting INTERBUS Rugged Line devices |
| WIREFOX-6SC |
51Kb/2P |
Replacement blade for WIREFOX 6SC, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm짼 |
| CF-10-WHEEL-SET-PU |
41Kb/1P |
2 replacement rolls for CUTFOX 10, with PU tread, for sensitive cables/conductors and their insulation (for hard insulation to some extent) |
| CRIMPFOX-C50-RCI-16 |
47Kb/2P |
Die (pair), for CRIMPFOX-C50, for insulated ring cable lug 16 mm짼, oval crimp |
| CRIMPFOX-C120-AI-70 |
46Kb/2P |
Die (upper part), for CRIMPFOX-C120, for ferrules (DIN 46228) 70 mm짼, trapeze crimp |
| CRIMPFOX-C120-RCI-10 |
46Kb/2P |
Die (pair), for CRIMPFOX-C120, for insulated ring cable lug 10 mm짼, oval crimp |
| CRIMPFOX-C120-RCI-25 |
46Kb/2P |
Die (pair), for CRIMPFOX-C120, for insulated ring cable lug 25 mm짼, oval crimp |
| CRIMPFOX-C120-RCI-35 |
46Kb/2P |
Die (pair), for CRIMPFOX-C120, for insulated ring cable lug 35 mm짼, oval crimp |
| CRIMPFOX-C120-RCT-35-1 |
46Kb/2P |
Die (pair), for CRIMPFOX-C120, for copper tube lug 16 + 35 mm짼, WM crimp |
| CF-500COV-AI-6 |
43Kb/2P |
Protective cover for crimping machine CF 500, for ferrules 0.25 - 6 mm짼 (AI 6...) |
| CRIMPFOX-C50-RCI-10 |
47Kb/2P |
Die (pair), for CRIMPFOX-C50, for insulated ring cable lug 10 mm짼, oval crimp |
| CRIMPFOX-C120-AI-95 |
46Kb/2P |
Die (upper part), for CRIMPFOX-C120, for ferrules (DIN 46228) 95 mm짼, trapeze crimp |