メーカー | 部品番号 | データシート | 部品情報 |
Tyco Electronics |
408-8697
|
697Kb / 3P |
Each die assembly consists of a nest die and an anvil die.
|
TE Connectivity Ltd |
408-32122
|
478Kb / 4P |
The die assembly features an anvil die and a crimper die
|
Tyco Electronics |
408-2592
|
209Kb / 4P |
Each crimping die consists of a stationary die, amoving die, and two die holding screws
|
408-10176
|
147Kb / 3P |
The tool consists of a head with a stationary die holder and moving die holder and handles with a ratchet.
|
Infineon Technologies A... |
TLE5009A16
|
1Mb / 24P |
Available as single die and dual die with separate supplies for each die
Version 1.2 2017-10 |
Tyco Electronics |
408-10022
|
91Kb / 2P |
Die Assembly
|
408-10256
|
427Kb / 4P |
The die set is a replaceable die assembly with three crimping areas which are marked with the letters R,B,and Y.
|
408-10185
|
217Kb / 4P |
The die assembly features a wire anvil, an insulation anvil, a wire crimper, and an insulation crimper.
|
408-10182
|
255Kb / 4P |
The die assembly features a wire anvil, an insulation anvil, a wire crimper, and an insulation crimper.
|
408-4347
|
131Kb / 5P |
The die assembly features a wire anvil, an insulation anvil, a wire crimper, and an insulation crimper
|