TR1102 SMD Ferrite Transponder Inductor

Features
The TR1102 series of surface mountable ferrite wound inductor is the very "rst SMD coil designed for transponder use. Its length and cross sectional area are optimized to achieve the maximum sensibility in the coil axis. Its size is excellent for plastic moulded inmobilizer transponders.
The TR1102 is the best solution when both cost and high-speed assembly of the circuit components are sought.

TR1504 SMD Ferrite Transponder Inductor

Features
The TR1504 series is the  large core volume alternative for Surface mountable low profile, ferrite wound transponder inductor.
Although the height remains the same as the TR1102 series, the larage core cross sectional area and length, allow a better rading distance and sensibility. It is recommended when the IC power consumption is high as well.

Main characteristics are:
- High sensitivity levels.
- Low profile.
- Winding coated to avoid handling problems.