General Description
The DS8007A multiprotocol dual smart card interface is an automotive grade, low-cost, dual smart card reader interface supporting all ISO 7816, EMV™, and GSM11-11 requirements. Through its 8-bit parallel bus and dedicated address selects (AD3–AD0), the DS8007A can easily and directly connect to the nonmultiplexed bytewide bus of a Maxim secure microcontroller. Optionally, the parallel bus can be multiplexed to allow direct access to the multiplexed bus of an 80C51-compatible microcontroller through MOVX memory addressing.

Features
♦ Complete Interface/Control for Two Separate Smart Card Devices
♦ 8kV (min) ESD Protection on Card Interfaces
♦ Internal IC Card Supply Voltage Generation 5.0V ±5%, 65mA (max) 3.0V ±8%, 50mA (max) 1.8V ±10%, 30mA (max)
♦ Automatic Card Activation, Deactivation, and Data Communication Controlled by Dedicated Internal Sequencer
♦ Host Interface Through an 8-Bit Parallel Bus (UserSelectable Multiplexed or Nonmultiplexed Modes)
♦ Chip Select and Three-State Bus Allow Multiple Devices (Card Readers and Memories) on Bus
♦ 8-Character Receive FIFO with Optional Programmable Depth/Threshold
♦ I/O Interface Pin to External ISO 7816 UART
♦ Separate Card Clock Generation (Up to 10MHz) with 2x Frequency Doubling
♦ Selectable Card Clock Stop High, Stop Low, or Internally Generated 1.25MHz (for Card Power-Down)
♦ EMV-Certified Reference Design and Evaluation Kit Available (DS8007-KIT)

Applications
    Banking Applications (Point-of-Sale Terminals, Debit/Credit Payment Terminals, PIN Pads, Automated Teller Machines)
    Telecommunications
    Pay Television
    Access Control