 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
TMP86FS28DFG データシート(PDF) 249 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMP86FS28DFG データシート(HTML) 249 Page - Toshiba Semiconductor |
|
|
249 / 272 page  Page 237 TMP86FS28DFG 18.7 Error Code When detecting an error, the device transmits the error code to the external controller, as shown in Table 18-13. Note: If a password error occurs, TMP86FS28DFG does not transmit an error code. 18.8 Checksum (SUM) 18.8.1 Calculation Method The checksum (SUM) is calculated with the sum of all bytes, and the obtained result is returned as a word. The data is read for each byte unit and the calculated result is returned as a word. Example: The checksum which is transmitted by executing the flash memory write command or flash memory SUM output command is calculated in the manner, as shown above. Table 18-13 Error Code Transmit Data Meaning of Error Data 62H, 62H, 62H Baud rate modification error. 63H, 63H, 63H Operation command error. A1H, A1H, A1H Framing error in the received data. A3H, A3H, A3H Overrun error in the received data. A1H If the data to be calculated consists of the four bytes, the checksum of the data is as shown below. B2H A1H + B2H + C3H + D4H = 02EAH SUM (HIGH)= 02H SUM (LOW)= EAH C3H D4H |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
