![]() |
データシートサーチシステム |
|
4250 データシート(PDF) 5 Page - Renesas Technology Corp |
|
|
4250 データシート(HTML) 5 Page - Renesas Technology Corp |
5 / 59 page ![]() 4 MITSUBISHI MICROCOMPUTERS 4250 Group SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER PIN DESCRIPTION Name Power supply Ground CNVSS Reset input System clock input System clock output I/O port F I/O port G I/O port S I/O port D I/O port C I/O port K Timer output Interrupt input Input/Output — — — Input Input Output I/O I/O I/O I/O I/O I/O Output Input Function Connected to a plus power supply. Connected to a 0 V power supply. Connect CNVSS to VSS and apply “L” (0V) to CNVSS certainly. Reset pulse input pin I/O pins of the system clock generating circuit. Connect pins XIN and XOUT directly. Then, pull up XIN pin through a resistor and pull down XOUT pin through a capacitor. 2-bit I/O port; for input use, set the latch of the specified bit to “1.” The output structure is N-channel open-drain. 4-bit I/O port. For input use, set the latch of the specified bit to “1.” The output structure is N-channel open-drain. Every pin of the ports has a key-on wakeup function and a pull-up function. Both functions can be switched by software. Ports G0 and G1 are also used as pins INT and TOUT, respectively. 4-bit I/O port. For input use, set the latch of the specified bit to “1.” The output structure is N-channel open-drain. Every pin of the ports has a key-on wakeup function which can be switched by software. Also, it is used to perform the logic operation using register A. Each pin of port D has an independent 1-bit wide I/O function. For input use, set the latch of the specified bit to “1.” The output structure is N-channel open-drain. Ports D2 and D3 are also used as ports C and K, respectively. 1-bit I/O port. For input use, set the latch of the specified bit to “1.” The output structure is N-channel open-drain. Port C has a pull-up function which can be switched by software. It is also used as port D2. 1-bit I/O port. For input use, set the latch of the specified bit to “1.” The output structure is N-channel open-drain. Port K has a pull-up function which can be switched by software. It is also used as port D3. TOUT pin has the function to output the timer 1 underflow signal divided by 2. It is also used as port G1. INT pin accepts an external interrupt. It also accepts the input signal to return the system from the RAM back-up state. It is also used as port G0. Pin VDD VSS CNVSS RESET XIN XOUT F0, F1 G0–G3 S0–S3 D0–D3 C K TOUT INT |
同様の部品番号 - 4250 |
|
同様の説明 - 4250 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |