| データシートサーチシステム |
|
H8/3028F データシート(PDF) 516 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8/3028F データシート(HTML) 516 Page - Renesas Technology Corp |
|
516 / 923 page ![]() Rev. 2.00, 09/03, page 486 of 890 Transmitting Serial Data (Asynchronous Mode): Figure 13.5 shows a sample flowchart for transmitting serial data and indicates the procedure to follow. Yes Yes <End> Clear TE bit to 0 in SCR Clear DR bit to 0 and set DDR bit to 1 TEND = 1 No Output break signal? No Read TEND flag in SSR All data transmitted? No TDRE = 1 Yes No Read TDRE flag in SSR (3) Initialize (4) Write transmit data in TDR and clear TDRE flag to 0 in SSR (1) (2) (3) (4) Start transmitting (1) (2) Yes SCI initialization: the transmit data output function of the TxD pin is selected automatically. SCI status check and transmit data write: read SSR and check that the TDRE flag is set to 1, then write transmit data in TDR and clear the TDRE flag to 0. To continue transmitting serial data: after checking that the TDRE flag is 1, indicating that data can be written, write data in TDR, then clear the TDRE flag to 0. When the DMAC is activated by a transmit-data-empty interrupt request (TXI) to write data in TDR, the TDRE flag is checked and cleared automatically. To output a break signal at the end of serial transmission: set the DDR bit to 1 and clear the DR bit to 0, then clear the TE bit to 0 in SCR. Figure 13.5 Sample Flowchart for Transmitting Serial Data |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |