Series 100 thru 111 DIP Jumpers

Note: Aries specializes in custom design and production. In addition to the

standard products shown on this page, special materials, platings, sizes,

and configurations can be furnished, depending on quantities. Aries

reserves the right to change product specifications without notice.

FEATURES:

• Aries offers a wide array of DIP jumper configurations and wiring possibilities for all

your programming needs.

• Reliable, electronically tested solder connections.

• Protective covers are ultrasonically welded on and

provide strain relief for cables.

• 10-color cable allows for easy identification and tracing.

• Consult factory for jumper lengths under 2.000 [50.80].

SPECIFICATIONS:

• Header body and cover is black UL 94V-0 4/6 Nylon.

• Header pins are Brass, 1/2 hard.

• Standard Pin plating is 10

μ [.25μm] min. Gold per MIL-G-45204 over 50 μ [1.27μm]

min. Nickel per QQ-N-290.

• Optional Plating:

“T” = 200

μ” [5.08μm] min. Matte Tin per ASTM B545-97 over 50μ” [1.27μm] min.

Nickel per QQ-N-290.

“TL” = 200

μ” [5.08μm] 90/10 Tin/Lead per MIL-T-10727 Type I over 50μ” [1.27μm]

min. Nickel per QQ-N-290.

• Cable insulation is UL Style 2697 Polyvinyl Chloride (PVC).

• .050 [1.27] pitch conductors are 28 AWG, 7/36 strand, Tinned Copper per ASTM B 33

(.039 [.99] pitch conductors are 26 AWG, 7/34 strand).

• Cable current rating=1 Amp @ 10°C [50°F] above

ambient.

• Cable voltage rating=300 Volts.

• Cable temperature rating=176°F [80°C].

• Cable capacitance=13.0 pf/ft. [42.7pf/meter] nominal

@1 MHz.**

• Crosstalk: 10’ sample, 5 ns rise time with 2 lines driven. Near end=4.7%;

Far end=4.3% nominal.**

• Propagation delay=1.5 ns/ft. [4.9 ns/meter] nominal.**

• Insulation resistance=1010 Ohms (10 ft. [3 meters] min.).

**Note: Applies to .050 [1.27] pitch cable only.

MOUNTING CONSIDERATIONS:

•Suggested PCB hole size=.033 ± .002 [.86 ±.05].

XX-XXXX-XXXXXX

ORDERING INFORMATION

SERIES

100

SERIES

101

HEADER DETAIL

“A”=(NO. OF CONDUCTORS X .050 [1.27) + .095 [2.41]

“B”=(NO. OF CONDUCTORS - 1) X .050 [1.27]

Cable length in inches:

Ex: 2” = -002-

2.5” = -002.5-

(min. length=2.”[50.80mm])

Note: 10, 12, 18, 20, & 28

conductor jumpers do not

have numbers on covers.

Numbers

shown pin

side for

reference

only.

Centers “C”

Dim. “D”

Available Sizes

.300 [7.62]

.395 [10.03]

4 thru 20

.400 [10.16]

.495 [12.57]

22

.600 [15.24]

.695 [17.65]

24, 28, 40

See Data Sheet No.

11007 for other

configurations and

additional information.

Optional suffix:

T=Tin plated header pins

TL= Tin/Lead plated

header pins

TW=twisted pair cable

ST=stripped and Tin

Dipped ends

(Series 106-111)

STL= stripped and

Tin/Lead Dipped Ends

(Series 106-111)

No. of conductors

(see table)

“L” ± .125

“L” ± .125

Jumper

series

PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

11006

REV. H

All Dimensions: Inches [Millimeters]

All tolerances ± .005[.13]

unless otherwise specified

Bristol, PA USA

TEL: (215) 781-9956

FAX: (215) 781-9845

http://www.arieselec.com • info@arieselec.com

abc