 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
STM32F446ME データシート(PDF) 121 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F446ME データシート(HTML) 121 Page - STMicroelectronics |
|
|
121 / 201 page  DocID027107 Rev 5 121/201 STM32F446xC/E Electrical characteristics 174 Input/output AC characteristics The definition and values of input/output AC characteristics are given in Figure 32 and Table 58, respectively. Unless otherwise specified, the parameters given in Table 58 are derived from tests performed under the ambient temperature and VDD supply voltage conditions summarized in Table 16. Table 57. Output voltage characteristics Symbol Parameter Conditions Min Max Unit VOL(1) 1. The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 14. and the sum of IIO (I/O ports and control pins) must not exceed IVSS. Output low level voltage for an I/O pin CMOS port(2) IIO = +8 mA 2.7 V ≤VDD ≤3.6 V 2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52. -0.4 V VOH(3) 3. The IIO current sourced by the device must always respect the absolute maximum rating specified in Table 14 and the sum of IIO (I/O ports and control pins) must not exceed IVDD. Output high level voltage for an I/O pin VDD–0.4 - VOL (1) Output low level voltage for an I/O pin TTL port(2) IIO =+ 8mA 2.7 V ≤VDD ≤3.6 V -0.4 V VOH (3) Output high level voltage for an I/O pin 2.4 - VOL(1) Output low level voltage for an I/O pin IIO = +20 mA 2.7 V ≤VDD ≤3.6 V -1.3(4) 4. Based on characterization data. V VOH(3) Output high level voltage for an I/O pin VDD–1.3(4) - VOL(1) Output low level voltage for an I/O pin IIO = +6 mA 1.8 V ≤VDD ≤3.6 V -0.4(4) V VOH(3) Output high level voltage for an I/O pin VDD–0.4(4) - VOL(1) Output low level voltage for an I/O pin IIO = +4 mA 1.7 V ≤VDD ≤3.6V -0.4(5) 5. Guaranteed by design. V VOH(3) Output high level voltage for an I/O pin VDD–0.4(5) - Table 58. I/O AC characteristics(1)(2) OSPEEDR y[1:0] bit value(1) Symbol Parameter Conditions Min Typ Max Unit 00 fmax(IO)out Maximum frequency(3) CL = 50 pF, VDD ≥ 2.7 V - - 4 MHz CL = 50 pF, VDD ≥ 1.7 V - - 2 CL = 10 pF, VDD ≥ 2.7 V - - 8 CL = 10 pF, VDD ≥ 1.8 V - - 4 CL = 10 pF, VDD ≥ 1.7 V - - 3 tf(IO)out/ tr(IO)out Output high to low level fall time and output low to high level rise time CL = 50 pF, VDD = 1.7 V to 3.6 V -- 100 ns |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
