STM32F446ME datasheet(144/201 Pages) STMICROELECTRONICS

部品番号	STM32F446ME

部品情報	8- to 14-bit parallel camera interface up to 54 Mbytes

PDF	201 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

144 / 201 page

Electrical characteristics

STM32F446xC/E

144/201

DocID027107 Rev 5

being performed on another analog input. It is recommended to add a Schottky diode (pin to

ground) to analog pins which may potentially inject negative currents.

Any positive injection current within the limits specified for IINJ(PIN) and ΣIINJ(PIN) in

Section 6.3.17 does not affect the ADC accuracy.

Figure 45. ADC accuracy characteristics

1. See also Table 76.

2. Example of an actual transfer curve.

3. Ideal transfer curve.

4. End point correlation line.

5. ET = Total Unadjusted Error: maximum deviation between the actual and the ideal transfer curves.

EO = Offset Error: deviation between the first actual transition and the first ideal one.

EG = Gain Error: deviation between the last ideal transition and the last actual one.

ED = Differential Linearity Error: maximum deviation between actual steps and the ideal one.

EL = Integral Linearity Error: maximum deviation between any actual transition and the end point

correlation line.

STM32F446ME データシート(PDF) 144 Page - STMicroelectronics