114- 13033

Rev B

6

of 7

S

Power Units

A power unit is an automatic or semi--automatic device used to assist in the application of a product.

Power unit includes the power source used to supply the force or power to an applicator.

S

Flat- Rock Tooling

Flat--rock press--in tooling may be used for mass insertion of the sockets into the plated--through holes

on the pc board. Removable carrier strips on 2.54 mm [.100 in.] centerlines may be used with this type

of mass insertion. Flat--rock press--in tooling is customer designed.

S

Vibratory/Vacuum System

Commercially available, fully automatic mass loading machines which will accommodate a

vibratory/vacuum system may be used for application of this product. The assembly table (1437513--1)

and backup board (1437513--3) may be used in conjunction with the mass loading machine.

Figure 7

PC Board Support Fixture

(Customer Supplied)

SM--3 Machine

814700--[ ]

(409--5626)

Spring Loaded Hand Tool

5--1437514--3, 5--1437514--5,

5--1437514--7

Pneumatic Hand

Tool System

5--1437514--8

Typical Pneumatic

Arbor

Frame Assembly

91112--3

Typical Manual Arbor

Frame Assemblies

58024--1, 91085--2