AI

## Overview of CSBL1060-R38M
I couldn't confirm the exact manufacturer or datasheet for this part number. However, the designation follows a common inductor naming convention, so you can decode most of its specifications from the label.
---
## Decoding the Part Number
| Segment | Meaning | Interpretation |
|---|---|---|
| **CSBL** | Series code | Typically a shielded power inductor series (the exact series depends on the manufacturer) |
| **1060** | Package size | About **10.0 mm × 6.0 mm** footprint (height varies by series) |
| **R38** | Inductance value | **0.38 µH** (the "R" stands for the decimal point) |
| **M** | Tolerance | **±20%** |
---
## Electrical Characteristics (Inferred)
| Parameter | Typical Meaning |
|---|---|
| Inductance | 0.38 µH (380 nH) |
| Tolerance | ±20% |
| Construction | Shielded (magnetic shield reduces electromagnetic interference) |
| Main function | Energy storage in switching power circuits |
| Rated current / DCR | Listed in the manufacturer's datasheet (not decodable from the name) |
---
## Typical Applications
- **DC-DC buck or boost converters**
- **Power supply filtering and energy storage**
- **Point-of-load (POL) regulators** for processors, memory, and FPGAs
- **Consumer electronics**, automotive modules, and communication equipment
---
## How the Part Works
1. The inductor stores energy in its magnetic field when current flows through it.
2. In a switching regulator, the switch turns on and off rapidly, and the inductor smooths the resulting current.
3. The shielded construction keeps the magnetic field contained, reducing noise in nearby circuits.
---
## Recommended Next Steps
- Search the exact part number on the manufacturer's website or on distributor sites such as Digi-Key, Mouser, or LCSC.
- Check the **datasheet** for saturation current (Isat), DC resistance (DCR), temperature rise current (Irms), and operating temperature range.
- Verify the footprint and height against your PCB layout before substituting parts.
- ⤷Which manufacturers produce CSBL-series power inductors?
- ⤷ How do I choose the right saturation current for a 0.38 µH inductor?
- ⤷ What circuit designs typically use a 0.38 µH shielded inductor?