DESCRIPTION
The MP5007 is a protection device designed to protect circuitry on the output (source) from transients on input (VCC). It also protects VCC from undesired shorts and transients coming from the source.
At start up, inrush current is limited by limiting the slew rate at the source. The slew rate is controlled by a small capacitor at the dv/dt pin. The dv/dt pin has an internal circuit that allows the customer to float this pin and still receives a 1.1ms ramp time at the source.

FEATURES
• Integrated 37mΩ Power FET
• Enable/Fault Pin
• Adjustable Slew Rate for Output Voltage
• Adjustable Current Limit
• Thermal Protection
• Over Voltage Limit
• Available in 3x3mm QFN10 Package

APPLICATIONS
• Hot Swap
• PC Cards
• Cell Phones
• Laptops