Overview

The MN101C series of 8-bit single-chip microcomputers incorporate multiple types of peripheral functions. This chip series is well suited for camera, VCR, MD, TV, CD, LD, printer, telephone, home automation, pager, air conditioner, PPC, remote control, fax machine, music instrument and other applications.

This LSI brings to embedded microcomputer applications flexible, optimized hardware configurations and a simple efficient instruction set. The MN101C97D has an internal 64 KB of ROM and 1 KB of RAM. Peripheral functions include 7 external interrupts, 13 internal interrupts including NMI, 8 timer counters, 2 sets of serial interfaces, A/D converter, watchdog timer, buzzer output, and remote control output. The configuration of this microcomputer is well suited for application as a system controller in a camera, timer selector for VCR, CD player, or MD.

With two oscillation system (max. 8 MHz/32 kHz) contained on the chip, the system clock can be switched to high frequency input (high speed mode), or to low frequency input (low speed mode).



Features

• ROM Size:

   MN101C97D, MN101CF97D 65536 × 8 bit

   MN101C97A 32768 × 8 bit

• RAM Size: 1024 × 8 bit

• Package:

   TQFP48 (7mm square, 0.5mm pitch)

   QFP44 (10mm square, 0.8mm pitch) *Under planning

• Machine Cycle:

  

     High speed mode

      0.125 ms / 8 MHz (2.7 V to 3.6 V)

      0.250 ms / 4 MHz (1.8 V to 3.6 V)

     High speed mode

      0.250 ms / 8 MHz (2.2 V to 3.6 V)

      0.500 ms / 4 MHz (1.8 V to 3.6 V)

   Low speed mode

      62.5 ms / 32 kHz (1.8 V to 3.6 V)

  

     High speed mode

      0.250 ms / 4 MHz (2.2 V to 3.6 V)

      0.270 ms / 3.7 MHz (2.0 V to 3.6 V)

      0.500 ms / 2 MHz (1.8 V to 3.6 V)

     High speed mode

      0.250 ms / 8 MHz (2.2 V to 3.6 V)

      0.500 ms / 4 MHz (1.8 V to 3.6 V)

   Low speed mode

      62.5 ms / 32 kHz (1.8 V to 3.6 V)

• Clock Gear Circuit Embedded:

   The operation speed of system clock can be changed by switching the dividing ratio of the oscillation clock.

   (1, 2, 4, 8, 16, 32, 64, 128 dividing)

• Oscillation Circuit:

   2 channels oscillation circuits (High-speed / Low-speed)

• Operation Modes:

   NORMAL mode (High-speed mode)

   SLOW mode (Low-speed mode)

   HALT mode (High-speed / Low-speed mode)

   STOP mode

   The operation clock can be switched in each mode.

• ROM Correction:

   Maximum of 3 parts in a program

• Operation Voltage: 1.8 V to 3.6 V

• Operation Temperature: -40°C to + 85°C