Description
The RHF330A device is a current feedback, single operational amplifier that uses very high-speed complementary technology to provide a large bandwidth of 1 GHz in gains of 2 while drawing only 16.6 mA of quiescent current. The RHF330A, also offers 0.1 dB gain flatness up to 160 MHz with a gain of 2. With a slew rate of 1800 V/µs and an output stage optimized for standard 100 Ω loads, this device is highly suitable for applications where speed and low distortion are the main requirements. The RHF330A is mounted in a Flat-8 hermetic package. Product status link RHF330A Rad-hard 1 GHz low noise operational amplifier RHF330A Datasheet DS6200 - Rev 8 - February 2020 For further information contact your local STMicroelectronics sales office.

Features
■ Bandwidth: 1 GHz (gain = 2)
■ Slew rate: 1800 V/μs
■ Input noise: 1.3 nV/√ Hz
■ Distortion: SFDR = -78 dBc (10 MHz, 2 Vpp)
■ 100 Ω load optimized output stage
■ 5 V power supply
■ ELDRS free up to 300 krad
■ SEL immune at 110 MeV.cm2/mg
■ SET characterized
■ SMD pin: 5962F07231
■ Mass: 0.45 g

Applications
■ Space data acquisition systems
■ Aerospace instrumentation
■ Nuclear and high energy physics
■ Harsh environments
■ ADC drivers