Description
PPS compliant USB type-C port protection Companion chip USB Type-C STM32 or STM8 USB Type-C with power delivery STM32 with UCPD support, example STM32L5, STM32G0, STM32G4 USB type-C port protection TCPP01-M12 Datasheet DS12900 - Rev 1 - September 2019 For further information contact your local STMicroelectronics sales office.

Features
■ Overvoltage protection on VBUS, adjustable up to 22 V, with external N-channel MOSFET
■ 6.0 V overvoltage protection (OVP) on CC lines against short-to-VBUS
■ System-level ESD protection for USB type-C connector pins (CC1, CC2), compliant with IEC 61000-4-2 level 4 (±8 kV contact discharge, ±15 kV air discharge)
■ Integrated charge pump to control the gate of an external N-channel MOSFET (which features a lower RDSON than a P-channel MOSFET)
■ Null quiescent current when no USB charging cable is attached for battery- operated "consumer/sink" applications
■ Integrated “dead battery” (RD resistors)
■ Over temperature protection (OTP)
■ Operating junction temperature from -40°C to 85°C
■ Complies with the latest USB type-C and USB power delivery standards
■ Compliant with programmable power supply (PPS) as defined in latest USB PD specification
■ Open-drain fault reporting
■ ECOPACK2 compliant

Applications
■ USB type-C used in sink configuration (consumer)
■ USB type-C used in source configuration (provider)
■ USB type-C for UFP (upstream facing port) or DFP (downstream facing port) configuration
■ USB type-C power delivery, PPS compliant