GENERAL DESCRIPTION
The Aeroflex Laboratories transceiver model ACT4435N is a new generation monolithic transceiver which provide full compliance with Macair and MIL-STD-1553 data bus requirements
The model ACT4435N performs the front-end analog function of inputting and outputting data through a transformer to a H009 data bus.
The Design of these transceivers reflects particular attention to active filter performance. This results in low bit and word error rate with superior waveform purity and minimal zero crossover distortion. The ACT4435N active filter design has additional high frequency roll-off to provide the required low harmonic distortion waveform without increasing the pulse delay characteristics significantly.

FEATURES
❑ ACT4435N Transceiver meets H009 data bus specifications
❑ Transmitter can be used to drive clock signal line
❑ Operates with ±15 Volts to ±12 Volts power supplies
❑ Direct replacement for CT1641 and CT1816 devices
❑ Voltage source output for higher bus drive power
❑ Plug-in and flat package available
❑ Monolithic construction using linear ASICs
❑ Processed and screened to MIL-STD-883 specs
❑ MIL-PRF-38534 compliant devices available
❑ Aeroflex is a Class H & K MIL-PRF-38534 Manufacturer