Features
■ Non-Sensitizing per ISO:10993
■ Easy to Handle & Convert
■ Breathable, Conformable
■ ETO, E-beam and Gamma Compatible
■ High MVTR - +1000 gms/sqm/day typical
■ Good for Short & Medium-Term Wear on Skin¹ Composition: Listed in same order as construction Tape caliper, without liner ~10 mils (~0.3 mm) White Spunlace Polyester Nonwoven Tape Backing 100% Polyester White Spunlace Nonwoven, Printable Adhesive Non-tackified acrylic-based adhesive developed for medical use Liner 83 lb. Poly-coated Kraft paper, silicone release on one side, 6 mils +/- 0.6 mils (0.15 mm +/- 0.015 mm) Typical Properties: * Included on CoA for orders. Adhesion to Stainless Steel, 180 deg* 17 ounces/inch width (0.5 kg/25mm width) (4.7 N/25 mm) Liner Release* 23 grams/inch width (23 gm/25 mm width) Please note: The values listed above should be considered representative or average only and should not be used for specification purposes. Roll Description: Tape supplied on 3 inch (76 mm) diameter cores. Length, Maximum 450 yards (411.5 meters) + 2 % Width, Maximum 48 inches (122 cm) + 1/32 inch (1.0 mm) Splices: Splices on the tape are intended for continuous processing. Roll Width Maximum Number of Splices per Roll < 8 inches (20 cm) 3 per 100 yards (91 meters) 5 per 200 yards (183 m) 9 per 450 yards (411.5 m) Recommended Storage & Rollstock Shelf Life: Product as supplied in original packaging will maintain stated properties for a period of two (2) years from date stamped on shipping container when stored at temperatures of 50-80F (10-27C) and a relative humidity between 40-60 percent. Please see reverse side for important product, safety and warranty information.