Features
■ Two Adhesive Systems
■ No Natural Rubber Latex
■ Gentle acrylic adhesive for skin adhesion
■ Medical and Retail Device Applications
■ Synthetic rubber adhesive for low surface
■ EtO and Gamma compatible energy (LSE) plastics Prototype Composition: Tape caliper, no liner 3 mils (0.08 mm) Synthetic rubber/Acrylic ‘2-in-One’ DC Tape Carrier 0.5 mils (0.01 mm) Transparent Polyester Film Adhesives, Open (Face) Side Paper (Back) Side Synthetic Rubber-based, designed for medical use Gentle Acrylic, developed for medical and surgical use Release Liner 62 lb. Bleached Kraft paper, silicone release (3.5 mil/0.09 mm) Prototype Properties1: Adhesion to Stainless Steel, SR Side Acr Side 129 oz/inch width (3.7 kg/25.4 mm width) 20 oz/inch width (0.6 kg/25.4 mm width) Liner Release, Preliminary (Acr side) 8 gm/inch width (8 gm/25 mm) 1 Properties listed based on very limited data and subject to change. Prototype Roll Description: Tape supplied on 3-inch (76 mm) diameter cores. Length 700 yards (640 m) ± 2% Maximum Width 48 inch (122 cm) ± 1/32 in (1.0 mm) Prototype Storage Conditions: Product as supplied in original packaging will maintain stated test properties for a period to be determined when stored at a temperature between 50-80oF (10-27oC) and a relative humidity between 40-60 percent. Please see reverse side for important product, safety and warranty information.