Features
■ Tape has been tested and found to meet the requirements of ASTM D 6123 / D 6123M-97. 3M does not test each lot for compliance to this specification.
■ Rubber adhesive for instant adhesion that sticks easily and helps reduce labor.
■ Good holding power to help resist lifting or curling.
■ Crepe paper backing that is conformable to maintain integrity when formed around a corner.
■ Easy tear and sliver resistant.
■ Good paint hold-out that resists bleed-through.
■ Controlled unwind.
■ Dispenses evenly and is less likely to tear off roll so works well on paper dispensers.
■ Tape may become very difficult to remove if subjected to prolonged outdoor exposure. ASTM Test Method Adhesion to Steel: 35 oz./in. width (38 N/100 mm) D-3330 Tensile Strength: 22 lbs./in. width (385 N/100 mm) D-3759 Elongation at Break: 10% D-3759 Tape Thickness: 5.3 mils (0.13 mm) D-3652 Temperature Use Range: Up to 250°F (121°C) for 30 min. Typical Physical Properties