Features
■ Aggressive Adhesion to Films & Nonwovens
■ EtO Sterilization Compatible
■ Medical Device Construction & Closures
■ Thin and Conformable
■ Limited Gamma Exposure - <45kGrays Composition: Hook White Polyolefin Copolymer Adhesive Double-coated synthetic rubber system, 3M Proprietary, designed for medical use Internal Adhesive Carrier 1 mil (0.025 mm) Polyethylene Release Liner 58 lb. Polycoated Kraft Paper, 2-side silicone-coated 4.3 mil (0.11 mm) Properties1: 135 Degree Peel, Average² ~ 12.5 oz/inch width (360 g/25 mm width) Dynamic Shear Closure, Average² ~ 290 oz/0.5 inch2 (8.3 kg/3.25 cm2) Tape Thickness, no liner 23 mils (0.6 mm) typical Adhesion to LDPE, 180 Degree Peel 36 oz/inch width (1.0 kg/25 mm width) Liner Release, Maximum 40 gm/inch width (40 gm/25 mm width) Maximum Roll Length & Width Width – 26 inches (66 cm) Length – 145 yards (~132 meters) 1 Properties listed based on limited data and subject to change. 2 Peel and shear tested used 3M #7330 Loop, are based on limited data and subject to change Prototype Storage Conditions: Product as supplied in original packaging will maintain stated properties for a period of two [2] years from date stamped on shipping container when stored at temperatures between 5080°F (10-27°C) and relative humidity between 40-60 percent. Please see reverse side for important product, safety and warranty information.