Description
Typical paper weight usage range* Nominal temperature usage range** R3379 Repulpable Splittable Flying Splice Tape is used for high speed splicing conditions when high tack is required and to compensate for roll profile issues. 50 – 200 gsm (30 lbs/3000 sq ft - 120 lbs/3000 sq ft) up to 204°C (400°F) R3389B Repulpable Splittable Flying Splice Tape for wide range of paper weights in manual and automatic splicing equipment for high speed splicing conditions when high tack is required > 50 gsm (30 lbs/3000 sq ft) up to 204°C (400°F) R9996 Repulpable Splittable Flying Splice Tape for most light weight paper grades in manual and automatic splicing equipment, for flying splice tape applications. < 120 gsm (80 lbs/3000 sq ft) up to 204°C (400°F) R9999 Repulpable Splittable Flying Splice Tape for heavyweight papers in manual and automatic splicing equipment, with moderate speed. > 120 gsm (80 lbs/3000 sq ft) up to 204°C (400°F) *Depends on paper grade. **As tested in laboratory, results may vary depending on machine and web tensions, nature of paper surface, application pressure, etc. which are outside of 3M control. Product Construction Available Roll Sizes For all products Backing Adhesive Liner Color Roll Length Repulpable paper Repulpable adhesive Easy-release Repulpable paper Splicing side - blue Tabbing side - clear 50 mm x 55m (2" x 60 yds) 60 mm x 55m (23/8" x 60 yds) 75 mm x 55m (3" x 60 yds) Typical Physical Properties