FEATURES
• Advanced NTC ceramic technology
• Wide temperature range from -55 °C to +185 °C
• Cost efficient thermistor design
• Small body diameter of maximum 2.4 mm
• Fast response time and high sensitivity
• Improved noxious gas and acid resistance
• Insulated Ag-plated NiFe alloy leads
• Mounting: radial
• AEC-Q200 qualified (rev. D)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912

APPLICATIONS
NTCLE350 can be processed by potting or molding into
sensors for electric traction motors, for example in the
sensing and protection of high current connectors.
NTCLE350 is suitable for EGR applications (exhaust gas
recirculation) for steady state temperatures going up to
185 °C.
This series is also intended for oil temperatures sensors
(OTS), in for example transmission systems and liquid
cooled starter/generator systems.
The AEC-Q200 qualification (between -55 °C and 185 °C)
enables this series to be used for classical motor thermal
sensing applications (engine coolant, fuel sensor, TMAP for
manifold air pressure) as well as in HVAC applications.

DESCRIPTION
These negative temperature coefficient thermistors consist
of a mini-chip soldered between two AWG #32 PEEK
insulated silver plated NiFe alloy leads and coated with
black colored epoxy lacquer. High adhesive strength
between PEEK wire and encapsulating lacquer.