GENERAL DESCRIPTION
The ADM3052 is an isolated controller area network (CAN)
physical layer transceiver with a V+ integrated linear regulator. The ADM3052 complies with the ISO 11898 standard. The device employs Analog Devices, Inc., iCoupler® technology to combine a 3-channel isolator, a CAN transceiver, and a linear
regulator into a single package. The power is isolated between a single 3.3 V or 5 V supply on VDD1, the logic side, and a single
24 V supply provided on V+, the bus side.
The ADM3052 creates an isolated interface between the CAN protocol controller and the physical layer bus. It is capable of running at data rates up to 1 Mbps. The device has integrated miswire protection on the bus pins, V+, V−, CANH, and CANL. The device has current-limiting and thermal shutdown features
to protect against output short circuits and situations where the
bus may be shorted to ground or power terminals. The device is fully specified over the industrial temperature range and is
available in a 16-lead, wide-body SOIC package.

FEATURES 5 kV rms isolated CAN transceiver Integrated V+ linear regulator Bus side powered by V+ and V−
11 V to 25 V operation on V+
5 V or 3.3 V operation on VDD1
Complies with ISO 11898 standard High speed data rates up to 1 Mbps Short-circuit protection on bus pins
Integrated bus miswire protection
Unpowered nodes do not disturb the bus 110 or more nodes on the bus
Thermal shutdown protection High common-mode transient immunity: >25 kV/μs
Safety and regulatory approvals UL recognition 5000 VRMS for 1 minute per UL 1577 VDE Certificates of Conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 846 V peak Industrial operating temperature range: −40°C to +85°C Wide body, 16-lead SOIC package

APPLICATIONS
CAN data buses
Industrial field networks DeviceNet applications