Description
The ECP… electronic circuit breaker, which has a design
width of just 12.5 mm, selectively protects all 24 V DC load
circuits. This is achieved using a combination of active
electronic current limitation and proven circuit breaker
technology including electrical isolation. The ECP… can be
plugged onto the proven TMCP SOCKET M base, which
ensures quick and easy mounting.
The ECP… can be used in applications that cover all
aspects of the switched-mode power supply unit. In the
event of an overload, switched-mode power supply units
reduce the output voltage, which means that all the
connected loads are no longer sufficiently supplied. This
means that if an error occurs in one load of a system, the
voltage will be affected in all load circuits.
The ECP… solves this problem by always limiting the
maximum possible current to 1.8 times (or 1.5 times) the
value of the set nominal current. Capacitive loads can thus
be switched on and loads are only switched off in the event
of an overload or short circuit.
An LED and integrated signal contacts indicate the
operating and error states.