Features:
◆ True Dual-Ported memory cells which allow simultaneous
access of the same memory location
◆ High-speed clock to data access
– Commercial: 7.5/9ns (max.)
– Industrial: 7.5ns (max.)
◆ Low-power operation
– IDT70V9279/69L
Active: 429mW (typ.)
Standby: 1.32mW (typ.)
◆ Flow-through or Pipelined output mode on either port via
the FT/PIPE pin
◆ Counter enable and reset features
◆ Dual chip enables allow for depth expansion without
additional logic

◆ Full synchronous operation on both ports
– 4ns setup to clock and 1ns hold on all control, data,
and address inputs
– Data input, address, and control registers
– Fast 6.5ns clock to data out in the Pipelined output mode
– Self-timed write allows fast cycle time
– 10ns cycle time, 100MHz operation in Pipelined output mode
◆ Separate upper-byte and lower-byte controls for
multiplexed bus and bus matching compatibility
◆ LVTTL- compatible, single 3.3V (±0.3V) power supply
◆ Industrial temperature range (–40°C to +85°C) is
available for selected speeds
◆ Available in a 128-pin Thin Quad Flatpack (TQFP) package
◆ Green parts available, see ordering information