Description

The iP2001 is a fully optimized solution for high current synchronous buck multiphase applications. Board space and design time are greatly reduced because most of the components required for each phase of a typical discrete-based multiphase circuit are integrated into a single 11mm x 11mm x 3mm BGA power block. The only additional components required for a complete multiphase converter are a PWM IC, the external inductors, and the input and output capacitors.

Features:

• 20A continuous output current with no derating up to TPCB = 90°C

• Very small 11mm x 11mm x 3mm profile

• Internal features minimize layout sensitivity *

• Optimized for very low power losses

• 3.3 to 12V input voltage