Features
• Operating Tj from -40 °C to +175 °C
• Ultrafast with soft recovery behaviour
• PPAP capable
• SMD with isolated top side cooling
• Low thermal resistance
• Backside in insulated ceramic
• Dice chips on Direct Bond Copper (DBC) substrate
• ECOPACK2 compliant
• MSL: Level 3
• Insulation voltage (UL 1557): VRMS = 4000 V

Description
The ultrafast bridge rectifier is a high-performance device, generally used in a full
wave rectification of an output stage of a DC/DC converter in automotive
applications.
Thanks to the high thermal capability of the ACEPACK SMIT package, this integrated
module will increase the power density in the application, through very high thermal
performances (top side cooling) and insulation done by an embedded ceramic.
Especially suited for use in Charger applications, either integrated in the vehicle or in
a charging station, this rectifier will enhance the performance of the targeted
application.

Applications
• Output rectification
• On board charger
• Charging station