Features
 AEC-Q100 qualified
 2 configurable half bridges for 7.5 A load
(RON = 150 mΩ) or 3 A load (RON = 300 mΩ)
 2 half bridges for 0.5 A load (RON = 2000 mΩ)
 1 configurable high-side driver for up to 1.5 A
(RON = 500 mΩ) or 0.35 A (RON = 1600 mΩ)
load
 1 configurable high-side driver for 0.7 A
(RON = 800 mΩ) or 0.35 A (RON = 1600 mΩ)
load
 3 configurable high-side drivers for
0.15 A/0.35 A (RON =2 Ω)
 1 configurable high-side driver for 0.25 A/0.5 A
(RON = 2 Ω) to supply EC Glass MOSFET
 1 configurable P-channel high-side drivers for
0.15 A/0.25 A (RON = 5 Ω)
 Internal 10-bit PWM timer for each stand-alone
high-side driver
 Buffered supply for voltage regulators and 1
high-side driver (OUT15 P-channel) to supply
e.g. external contacts
 Programmable soft-start function to drive loads
with higher inrush currents as current limitation
value for OUT1-6 (i.e. motors) and OUT7,
OUT8 (i.e. bulbs) with thermal expiration
feature
 Flexible HS drivers (OUT7, OUT8 and OUT9)
suitable to drive external LED modules with
high input capacitance
 All the embedded outputs come with protection
and supervision features:
– Current Monitor (high-side only)
– Open-load and Overcurrent
– Thermal warning and Thermal shutdown
 2 fully protected drivers for external MOSFETs in
H-bridge configuration, dual Half bridge
configuration and combined configuration to
drive 3 motors
 Fully protected driver for external high-side
MOSFET
 Control block for electro-chromic element
 One 5 V voltage regulators for microcontroller
supply
 One 5 V voltage tracker for peripheral supply
 Programmable reset generator for power-on
and under voltage
 Configurable window watchdog
 LIN 2.2a compliant (SAEJ2602 compatible and
SAE J2962-1 compliant) transceiver
 Advanced high speed CAN transceiver (ISO
11898-2:2003 /-5:2007 and SAE J2284 & SAE
J2962-2 compliant) with local failure and bus
failure; HS-CAN Transceiver Conformance
Test according to «Interoperability test
specification for high-speed CAN transceiver or
equivalent devices IOPT.CAN v02d00»
 Separated (Isolated) fail-safe block with 2 LS
(RON = 1 Ω) to pull down the gates of the
external HS MOSFETs
 Thermal clusters
 A/D conversion of supply voltages and internal
temperature sensors
 Embedded and programmable VS duty cycle
adjustment for LED driver outputs
 Generator Mode for Power Trunk/Tailgate
applications