Features
 Multipower BCD technology
 MOSFET output power stage
 DMOS power output
 Differential input
 Class SB high efficiency
 High output power capability: 4x25 W/4 Ω @
14.4 V, 1 kHz, 10% THD, 4 x 45 W max power
 Full I2C bus driving:
– Standby
– Independent front/rear soft play/mute
– Selectable gain 26 dB /16 dB (for low noise
line output function)
– High efficiency enable/disable
– I2C bus digital diagnostics (including DC
bus AC load detection)
 Fault detection through integrated diagnostics
 DC offset detection
 Four independent short circuit protection
 Clipping detector pin with selectable threshold
(2 %/10 %)
 Standby/mute pin
 Linear thermal shutdown with multiple thermal
warning
 ESD protection
 Very robust against any kind of misconnection
 Improved SVR suppression during battery
transients
 Capable to play down to 6 V (e.g. “Start-stop”)

Description
The TDA75610DLVPD is the most advanced
BCD technology quad bridge car radio amplifier,
including a wide range of innovative features.
The TDA75610DLVPD is equipped with the most
complete diagnostics array that communicates
the status of each speaker through the I2C bus.
The differential input stage improves the
disturbance rejection.
The dissipated output power under average
listening condition is significantly reduced when
compared to the conventional class AB solutions,
thanks to the innovative internal design. Moreover
it has been designed to be very robust against
several kinds of misconnections.
It is moreover compliant to the most recent OEM
specifications for low voltage operation (so called
'start-stop' battery profile during engine stop),
helping car manufacturers to reduce the overall
emissions and thus contributing to environment
protection.