The FUSB15200 is a highly integrated dual port USB Type−C and
Power Delivery Controller optimized for Sink and DRP applications.
The FUSB15200 enables a complete solution through optimized
hardware peripherals and complete open−source embedded firmware
all in a compact solution. Maximizing total system power budgets is
enabled through both hardware and firmware of the FUSB15200.
onsemi offers a complete open−source embedded firmware
solution. System designers can easily tailor this firmware to meet the
specific needs of their end application through an easy to use API for
the embedded firmware. The FUSB15200 also provides a completely
USB PD3.1 compliant solution with interoperability with leading
mobile and computing devices in the market.

Features
• Small Footprint Dual−port USB PD Controller Supporting the Most
Popular Peripherals
♦ USB PD 3.1 & USB Type−C 2.1
♦ 4x I2C Host/Device
♦ Dual USB BC1.2 Consumer/Provider
♦ USB2.0 Isolation Switches
• Fully Programmable and Upgradable Open−Source Firmware
Providing API for Customer Specific Device Policy Manager
Development
• Integrated LDOs from VBUS Allows Dead−Battery Functionality
• High Voltage Protection on CC and VBUS Pins (28 V DC)
• Up to 20 GPIOs
• 10−bit ADC for High Performance System Measurements
• External Temperature Monitoring via NTC Resistors
• DisplayPort® HPD Signal Conversion
• FastRole Swap Support
• 40−pin QFN Package (5 mm x 5 mm, 0.4 mm Pitch)
• These are Pb−free Devices

Typical Applications
• Sinks and DRP Devices
• Laptops
• Docks