FEATURES
• High adhesive strength between the PVC wire
and the encapsulating lacquer
• Accurate down to ± 0.3 °C
• Small body of max. 3 mm for easy installation
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912

APPLICATIONS
• Temperature measurement, sensing, and control
• On battery packs, heat-sinks, tubing, enclosures, etc.

DESCRIPTION
These sensors consist of small NTC chip soldered between
stranded AWG #30, PVC 105 °C single hook-up wires (acc.
to UL 1061). Terminations are solder dipped. They are
lacquered and insulated with a black epoxy coating.
MARKING

Black lacquered body without additional mark

PACKAGING
SPQ: 125 items (for standard 40 mm lead wire length)

MOUNTING
Important mounting and handling instructions: see
www.vishay.com/doc?29222
By soldering the wire end, or crimping connector. The body
can be inserted in a tube, free in air, tape attached or glued.
Not intended for fluid immersed applications or continuous
contact with water. Not for potting in hard material or
over-molding applications. Consult Vishay for specific
application or mounting.

DESIGN-IN SUPPORT
• For complete curve computation, please visit:
www.vishay.com/thermistors/ntc-curve-list/
• Other R/T curves available on request
• The lead length can be customized
• Connectors can be added to the wire end