Features
• Two highly accurate redundant Hall measurement channels (main and sub)
integrated on one chip.
• Developed compliant to ISO 26262 (first edition 2011) Safety Element out of
Context for safety requirements rated up to ASIL D.
• High diagnostic coverage by plausibility checking of main and sub signal on
system level.
• Fast digital SPC interface with min. 0.5μs unit time for transmission of main
and sub signals in less than 500 μs.
• Bus-capability for up to 4 sensor ICs on one data line.
• Selectable 12/14/16bit output signals, protected by CRC and rolling counter.
• Thin 4 pin leaded single sensor package.
• Operating automotive temperature range -40°C to 150°C.
• Digital temperature and stress compensation.
• Reverse-polarity and over voltage protection for VDD, GND and OUT pins.
• Main and sub channel programmable independently in EEPROM.
• Multipoint calibration up to 9 points.
• Frameholder mechanism.
• Single-wire SICI programming interface on output pin.
• 2 x 16 bit user-configurable ID in EEPROM.

PRO-SIL™ Features
• Safety Manual and Safety Analysis Summary Report.