FO converter with integrated optical diagnostics, for DeviceNet™, CAN, CANopen® up to 800
kbps, basic module, interfaces: 1 x CAN, 1 x alarm, 1 x FO (BFOC), 850 nm, for PCF/fiberglass
cable (multimode)

Product Description
The PSI-MOS-DNET... fiber optic transmission system enables DeviceNet™ and CANopen® users to benefit from simple and interference-free
networking based on fiber optics. In addition, bus cable short circuits only affect the specific potential segment concerned. This increases overall
availability, and improves flexibility when designing the bus topology. The use of fiber optic technology enables branch lines and star and tree
structures to be created. The 22.5 mm space-saving devices from the PSI-MOS-DNET CAN/FO... series feature an internal
backplane. The maximum network expansion that can be achieved (sum total of copper and fiber optic cables) essentially depends on the data rate used.

Your advantages
• Data rates of up to 800 kbps, set via DIP switches
• Approved for use in zone 2
• Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1