DESCRIPTION
The DS1250 4096K Nonvolatile SRAMs are 4,194,304–bit, fully static, nonvolatile SRAMs organized as 524,288 words by 8 bits. Each NV SRAM has a self–contained lithium energy source and control circuitry which constantly monitors VCC for an out–of–tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. There is no limit on the number of write cycles which can be executed and no additional support circuitry is required for microprocessor interfacing.

FEATURES
• 10 years minimum data retention in the absence of external power
• Data is automatically protected during power loss
• Unlimited write cycles
• Low-power CMOS
• Read and write access times as fast as 70 ns
• Lithium energy source is electrically disconnected to retain freshness until power is applied for the first time.
• Full ±10% VCC operating range (DS1250YL)
• Optional ±5% VCC operating range (DS1250BL)
• Optional industrial temperature range of –40°C to +85°C, designated IND
• JEDEC standard 32–pin DIP package
• Low Profile Module (LPM) package
    – Fits into standard 68–pin PLCC surface–mountable sockets
    – 250 mil package height