General Description
The 8V34S208 is a differential 1:8 LVDS fanout buffer with a 2:1
input multiplexer. The device accepts DC to 250MHz clock and data
signals and is designed for 1Hz clock /1PPS, 2kHz and 8kHz signal
distribution. Controlled by the input mode selection pin, the
differential input stages accept both rectangular or sinusoidal
signals. The 8V34S208 also provides level translated
LVCMOS/LVTTL outputs which are copies of the individual
differential inputs CLKA and CLKB. The propagation delay of the
device is very low, providing an ideal solution for clock distribution
circuits with tight phase alignment requirements. The multiplexer
select pin (SEL) allows to select one out of two input signals, which
is copied to the four differential outputs.

Features
• Designed for 1PPS, 2kHz, 8kHz and 10MHz GPS clock signal
distribution
• High speed 1:8 LVDS fanout buffer
• Eight differential LVDS output pairs
• 2:1 input multiplexer
• Two selectable differential inputs accept LVDS and LVPECL
signals
• Accepts rectangular and sinusoidal input signals
• Two input monitoring outputs (LVCMOS)
• Max output frequency: 250 MHz
• Additive RMS phase jitter:
118fs (typical) at 100Mhz (12k-20Mhz)
• Part-to-part skew: 250ps (maximum)
• Propagation delay: 325ps (typical), LVDS output
• Full 2.5V and 3.3V voltage supply
• -40°C to 85°C ambient operating temperature
• Lead-free 32-lead VFQFN (RoHS 6/6) packaging