Features
▪ Low power, less than 1.4W typical
▪ Low jitter, less than 100 fs-RMS
▪ PCIe Gen 1-6 CC, SRIS, and SRNS support
▪ Up to six fractional output dividers and 12 integer
output dividers
• Each fractional output divider is free-run and
locked to APLL
▪ Each fractional output divider can be configured as
NCO or DCO
▪ LVCMOS, LVPECL, LVDS, HCSL, CML, SSTL,
HSTL output modes supported with programmable
output swing and common mode voltage
▪ One crystal/XO input
▪ Up to nine GPIO pins programmable to device
select or system monitor options
▪ Supports 1MHz I2C, 400kHz SMBus, or 50MHz
SPI serial port
▪ Internal non-volatile memory (up to 16 different
configurations), or external serial I2C EEPROM
provide default device settings on power-up.
▪ 2.5V and 3.3V core and 1.8V, 2.5V, and 3.3V
output operation
▪ -40° to +85°C industrial temperature operation