General Description
The SLG59H1313C features a low 23 mΩ RDSON internal
nFET that protects low-voltage 2.5 Vdc to 5.5 Vdc operating
systems against voltage faults up to 29 Vdc. An internal clamp
circuit protects the downstream components from surge
voltage up to 100 V. The SLG59H1313C features a fast 50 ns
(typ) over-voltage response time that turns off the internal
nFET if the input voltage exceeds the OVP threshold. The
OVP threshold is adjustable with optional external resistors to
any voltage between 4 V and 20 V. Over-temperature
protection powers down the device at 145°C (typ).
SLG59H1313C also features an Over-current protection that
turns off the switch if the current exceeds 7 A (typ), this gives
additional protection from over-heating the device.
SLG59H1313C incorporates an open-drain output PG pin.
When VIN_min < VIN < VOVLO and the switch is on, PG will be
driven low indicating a good power input, otherwise it is high
impedance.
Features
• Pin-to-pin to FPF2280 with Improved Performance
• Surge protection (IEC61000-4-5: >100 V)
• Input maximum voltage rating: 29 Vdc
• Integrated low RDSON nFET switch: 23 mΩ (typ)
• 4.5 A continuous current capability
• Over-Voltage Protection (OVP): adjustable 4 V to 20 V
• Over-Temperature Protection (OTP): 145°C (typ)
• 7 A Over-Current Protection (OCP)
• Fast OVP turn-off response: typical 50 ns
• 1.3 mm x 1.8 mm in 12-ball WLCSP
• Pb-Free/Halogen-Free /ROHS Compliant