General Description
The ICS810001I-21 is a PLL based synchronous clock generator
that is optimized for digital video clock jitter attenuation and
frequency translation. The device contains two internal frequency
multiplication stages that are cascaded in series. The first stage is a
VCXO PLL that is optimized to provide reference clock jitter
attenuation, and to support the complex PLL multiplication ratios
needed for video rate conversion. The second stage is a
FemtoClock® frequency multiplier that provides the low jitter, high
frequency video output clock.
Preset multiplication ratios are selected from internal lookup tables
using device input selection pins. The multiplication ratios are
optimized to support most common video rates used in professional
video system applications. The VCXO requires the use of an
external, inexpensive pullable crystal. Two crystal connections are
provided (pin selectable) so that both 60 and 59.94 base frame rates
can be supported. The VCXO requires external passive loop filter
components which are used to set the PLL loop bandwidth and
damping characteristics.
Features
• Jitter attenuation and frequency translation of video clock signals
• Supports SMPTE 292M, ITU-R Rec. 601/656 and
MPEG-transport clocks
• Support of High-Definition (HD) and Standard-Definition (SD)
pixel rates
• Dual VCXO-PLL supports both 60 and 59.94Hz base frame rates
in one device
• Supports both 1000/1001 and 1001/1000 rate conversions
• Dual PLL mode for high-frequency clock generation
(36MHz to 148.5MHz)
• VCXO-PLL mode for low-frequency clock generation (27MHz and
26.973MHz)
• One LVCMOS/LVTTL clock output
• Two selectable LVCMOS/LVTTL clock inputs
• LVCMOS/LVTTL compatible control signals
• RMS phase jitter @148.3516MHz, (12kHz - 20MHz):
1.089ps (typical)
• 3.3V supply voltage
• -40°C to 85°C ambient operating temperature
• Lead-free (RoHS 6) packaging