1 Features
• AEC-Q100 qualified for automotive applications
– Temperature grade 1: –40°C to +125°C, TA
– Device HBM ESD classification level 3A
(≥2500 V)
– Device CDM ESD classification level C3
(≥1500 V)
• Low offset voltage: ±210 μV
• Low offset voltage drift: ±0.25 μV/°C
• Low noise: 6.8 nV/√Hz at 1 kHz, 4.2 nV/√Hz
broadband
• High common-mode rejection: 110 dB
• Low bias current: ±10 pA
• Rail-to-rail input and output
• Wide bandwidth: 11-MHz GBW, unity-gain stable
• High slew rate: 33 V/μs
• Low quiescent current: 2.4 mA per amplifier
• Wide supply: ±1.35 V to ±8 V, 2.7 V to 16 V
• Robust EMIRR performance

2 Applications
• Optimized for AEC-Q100 grade 1 applications
• Infotainment and cluster
• Passive safety
• Body electronics and lighting
• HEV/EV inverter and motor control
• On-board (OBC) and wireless charger
• Powertrain current sensor
• Advanced driver assistance systems (ADAS)
• High-side and low-side current sensing

3 Description
The TLV916x-Q1 family (TLV9161-Q1, TLV9162-Q1,
and TLV9164-Q1) is a family of 16-V, general-purpose
automotive operational amplifiers. These devices
offer exceptional DC precision and AC performance,
including rail-to-rail input or output, low offset (±210
μV, typical), low-offset drift (±0.25 μV/°C, typical), and
low noise (6.8 nV/√Hz at 1 kHz, 4.2 nV/√Hz at 10
kHz).
Features such as wide differential input voltage range,
high short-circuit current (±73 mA), and high slew
rate (33 V/μs) make the TLV916x-Q1 a flexible,
robust, and high-performance op amp for automotive
applications.
The TLV916x-Q1 family of op amps is available in
standard packages and is specified from –40°C to
125°C.