Key Features
 Two Power Supply Inputs:
 2.5 V (±8 %) to 5.0 V (±10 %) VDD
 3.3 V (±9 %) to 12.0 V (±10 %) VDD2
 Four High Voltage High Current Drive GPOs
 Dual/Single Full Bridge Driver Option
 Quad/Dual/Single Half Bridge Driver Option
 Slew Rate Modes:
 Motor Driver Mode
 Pre-Driver (MOSFET Driver) Mode
 SLEEP Function
 Low RDS ON High Side + Low Side resistance = 0.4 W
 2 A Peak, 1.5 A RMS per Full Bridge (at VDD2 = 5 V,
T = 25 °C) (Note 1)
 4 A Peak, 3 A RMS per two Full Bridge connected in
parallel (at VDD2 = 5 V, T = 25 °C) (Note 1)
 2 A Peak, 1.5 A RMS per Half Bridge GPO
(at VDD2 = 5 V, T = 25 °C) (Note 1)
 Integrated Protections:
Over Current Protection (OCP)
Short Circuit Protection
Under-Voltage Lockout (UVLO)
Thermal Shutdown (TSD)
 SENSE_A, SENSE_B Inputs that are connected to the
Current Comparators for Current Control
 Fault Signal Indicator individual per Full Bridge:
OCP
UVLO
TSD
 Differential Amplifier with Integrator and Comparator for Motor Speed Control Function
 Two Current Sense Comparators with Dynamical Vref Mode
 Two High-Speed General Purpose ACMPs
 Modes: UVLO, OCP, TSD, Voltage Monitor, Current Monitor