Functional Description
The CY7C1352 is a 3.3V 256K by 18 synchronous-pipelined Burst SRAM designed specifically to support unlimited true back-to-back Read/Write operations without the insertion of wait states. The CY7C1352 is equipped with the advanced No Bus Latency™ (NoBL™) logic required to enable consecutive Read/Write operations with data being transferred on every clock cycle. This feature dramatically improves the throughput of the SRAM, especially in systems that require frequent Read/Write transitions.The CY7C1352 is pin/functionally compatible to ZBT™ SRAMs MCM63Z819 and MT55L256L18P.

Features
• Pin compatible and functionally equivalent to ZBT™ devices MCM63Z818 and MT55L256L18P
• Supports 143-MHz bus operations with zero wait states
    — Data is transferred on every clock
• Internally self-timed output buffer control to eliminate the need to use OE
• Fully registered (inputs and outputs) for pipelined operation
• Byte Write Capability
• 256K x 18 common I/O architecture
• Single 3.3V power supply
• Fast clock-to-output times
    — 4.0 ns (for 143-MHz device)
    — 4.2 ns (for 133-MHz device)
    — 5.0 ns (for 100-MHz device)
    — 7.0 ns (for 80-MHz device)
• Clock Enable (CEN) pin to suspend operation
• Synchronous self-timed writes
• Asynchronous output enable
• JEDEC-standard 100-pin TQFP package
• Burst Capability—linear or interleaved burst order
• Low standby power