10-bit resolution
Sampling rate up to 50 MHz
DC sampling allowed
One clock cycle conversion only
High signal-to-noise ratio over a large analog input frequency range (9.3 effective bits at 4.43 MHz full-scale input at fclk = 40 MHz)
No missing codes guaranteed
In-Range (IR) CMOS output
Levels TTL and CMOS compatible digital inputs
3 V to 5 V CMOS digital outputs
Low-level AC clock input signal allowed
Internal reference voltage regulator
Power dissipation only 235 mW (typical)
Low analog input capacitance, no buffer amplifier required
No sample-and-hold circuit required