Features
Normal or lateral magnetic sensitivity
options X,Y,Z
Switch output – fully isolated from the
supply voltage, OUTA/OUTB potentials can
be below GND or above VDD
Typical RON of 3Ω
Output current up to 100mA (AMR 200mA)
Programmable magnetic thresholds and
threshold temperature coefficient
Programmable magnetic Latch, Unipolar
and Omnipolar Switch function
Built-in daisy chain functionality to
synchronize multiple devices
Operating voltage range from 4.5V to 28V
Low average supply current – 180μA
typical
Under-Voltage Reset protection
Thermal protection
Package RoHS compliant TSOT-6L

Application Examples
Reed switch replacement
▪ Fluid level meter applications
▪ Push button
▪ Direct load driving
▪ HIGH/LOW side switch

Description
The MLX92362/61 is a monolithic sensor IC
sensitive to normal or lateral magnetic field.
The MLX92362/61 has two output pins, OUTA and
OUTB. They are connected to an integrated,
electrically isolated switch. The MLX92362 can be
programmed to output direct or inverted signal
from one of the two sensitive axes – X(Y) or Z. The
signal available on the output pins is result of
comparison between the applied magnetic field
and the pre-programmed magnetic thresholds BOP
and BRP for the selected sensitive axis.
The MLX92362/61 can be programmed to act as
magnetic latch, unipolar switch or omnipolar
switch.
The MLX92362/61 can be used as general
replacement of reed switches having the
advantage of solid-state reliability. Note that a
series of ICs can be connected in a single module,
and synchronized via the same 3-wire interface
thanks to the built-in daisy chain function.
Customers can benefit from the end-of-line (EoL)
programming capability of the MLX92362 or
alternatively, they can choose a pre-programmed
MLX92361 device.