The plug-in terminal strip 302-NSLP, low version, is available in 8 mm pitch with 2
to 12 poles.
It has one screw connection per pole and one vertical pin for the connection to the
female clamping unit.
Plug-in terminal strip 302-NFLP creates a plug-in connection where the wire
entrances are located parallel on top of each other. This combination of plug-in
terminal strips requires relatively little mounting space. That is why tensile forces
on the conductors have no direct effect on the contact performance.
This arrangement does not allow for the connection of an earth lead.
The wire protector of the “HDS”-version reliably prevents damage to multi-wire
flexible conductors by the turning screw.
These terminals strips can be screw-mounted on a substrate.