Tab/screw connector block 982-F in 9,52 mm pitch is based on our proven 98..
series (see Catalogue 4 “Pitch 7,5 mm”).
It features a 4.8 mm tab connector in star-shaped arrangement and is available in
2- to 24-pole design for a maximum of six tab connectors or alternatively one screw
connector per pole.
The compartments on both extremities of the block can serve for mounting on a
substrate. Upon request, other compartments can remain empty for mounting
purposes.
Installation note:
Since the bottom is not closed, the connector should be mounted on an isolating
substrate/surface. Alternatively, our marking strip BST-983-F can be used for this
purpose.
Due to the large variety of different types, listing numbers and prices of the various
articles is not possible. When inquiring or ordering products with uniform assembly,
stating the number of poles and the assembly number is sufficient. For mixed
assemblies, we require an exemplary scheme including the orientation of
asymmetrical assemblies, stating the number of desired poles and the assembly of
each pole with assembly number